Will reusing a mobile phone as a smart webcam be cheaper than buying a dedicated webcam?

Aurora0001
  • Will reusing a mobile phone as a smart webcam be cheaper than buying a dedicated webcam? Aurora0001

    With Perch, it seems that you can use an old Android smartphone with a camera as a webcam, which seems like a great idea to reuse old devices that you no longer want.

    However, in normal usage, phones tend to use a lot of energy in my experience (some phones barely last a day on battery in normal usage!), and the camera seems to use even more than usual, so I'm concerned that there may be a lot of power consumption.

    If I reused a Samsung Galaxy S3 with Perch, is it likely to cost more than just buying a webcam and connecting it to my network, or is the difference negligible?


    In regards to what I'm comparing, I'm interested in whether (cost of webcam + electricity) would be cheaper than (cost of electricity for phone). If the webcam only pays for itself after 5 or 10 years, I'm not too concerned and won't bother buying it, but if I'm going to see savings after 6 months it might be more valuable.

    As far as I can tell, Perch just runs the camera 24/7 and communicates via Wi-Fi, but I've turned Bluetooth and mobile data off, along with GPS, since I don't need them.

    As requested by Mawg, an example of the sort of thing the D-Link DCS-932L, which says the maximum power consumption is 2W on the datasheet. There isn't any information on the typical power consumption, however, so an answer with some explanation on what might typically be expected could be helpful.

    I'm not particularly interested in any additional features such as low-light vision, although it would be a bonus. Motion detection would be useful though, since Perch does seem to support this by default and it would be advantageous. Notifications of motion would be good as well.

    The camera will be situated inside, so I wouldn't expect any temperature extremes or dampness (otherwise I have a much bigger problem!).

    When charging, I would be using a standard 5W USB charger for the phone, which would be connected all the time.

  • Are you really only asking which will draws more current? In either case, the cost will be negligible.

    I would have made this a comment, but it grew too long.

    What, exactly, are your requirements for a webcam? It is just for Skype & the like, or for security?

    Must it operate in low light? You Android might not be up to that.

    If you are usign it for security, what sort of environment will it operate in? Heat, cold, rain, all recommend at least an IP67 housing. That will add cost to an Android solution.

    You might get some webcam advice at https://hardwarerecs.stackexchange.com/

    Have you Googled and checked the price of webcams? Be aware that webcams will probably offer more features than Pecrh. You might get some webcam advice at https://hardwarerecs.stackexchange.com/

    Have you defined your requirements completely? Can you post them here? You can ask us on https://softwarerecs.stackexchange.com/ for an approriate app to control your Android.

    Off the top of my head - do you need motion detection? Time lapse? Upload to a remote site? Inform you of movement? Without knowing your use case, I can't offer much more help. If you add more detail to your question, you will get much better help.

    If you do go with your Android, don't forget to turn off GPS.

  • If your 5W charger can handle the demands, it will use three watts more than the spec of 2W for the cam you linked to. Every two weeks, those three extra watts will use one kilowatt-hour, which I'll guess costs you fifteen cents, or about four (US) dollars annually. A bit of Google-fu found the D-Link DCS-932L delivered for US$ 37. Crunch the numbers, and you are looking at more than nine years before you break even. One consideration you didn't mention was how the phone (cam) will be mounted and aimed. A nicely framed and usable camera angle can be tricky to get without the right equipment. If you're interested in a solution for almost no money, ask, and I'll describe how.

Tags
power-consumption digital-cameras microprocessors
Related questions and answers
  • With Perch, it seems that you can use an old Android smartphone with a camera as a webcam, which seems like a great idea to reuse old devices that you no longer want. However, in normal usage, phones tend to use a lot of energy in my experience (some phones barely last a day on battery in normal usage!), and the camera seems to use even more than usual, so I'm concerned that there may be a lot of power consumption. If I reused a Samsung Galaxy S3 with Perch, is it likely to cost more than just buying a webcam and connecting it to my network, or is the difference negligible? In regards

  • , I requested them to uninstall the hardware about a month and a half ago with no further response. So, as far as I can tell, I now have 3 Honeywell door sensors and 1 Honeywell Motion Detector (still installed). I'm curious if there is any way to include these sensors with my Samsung SmartThings system? Would it be as simple as adding/changing a wireless component to a compatible signal...My wife and I just purchased a new house and the ADT Security sensors were still installed, but no keypad panel. After speaking with a Rep on pricing and logistics, we decided not to continue

  • , I requested them to uninstall the hardware about a month and a half ago with no further response. So, as far as I can tell, I now have 3 Honeywell door sensors and 1 Honeywell Motion Detector (still installed). I'm curious if there is any way to include these sensors with my Samsung SmartThings system? Would it be as simple as adding/changing a wireless component to a compatible signal...My wife and I just purchased a new house and the ADT Security sensors were still installed, but no keypad panel. After speaking with a Rep on pricing and logistics, we decided not to continue

  • . The idea is simple. The device would be capable of recognising words, just some words nothing too difficult. By default, it would keep Alexa in Microphone Off state, so it won't pick up voices from its environment. Now, when I want to use Alexa, instead of waking it up directly I would use my proxy, that would somehow enable Alexa's microphone and switch Alexa into Listening state. When Alexa goes... into a specific state. So how can I make Alexa to switch between its states using another device? It all comes down to what are the possibilities to interface an Amazon Echo / Dot (and Alexa

  • . The idea is simple. The device would be capable of recognising words, just some words nothing too difficult. By default, it would keep Alexa in Microphone Off state, so it won't pick up voices from its environment. Now, when I want to use Alexa, instead of waking it up directly I would use my proxy, that would somehow enable Alexa's microphone and switch Alexa into Listening state. When Alexa goes... into a specific state. So how can I make Alexa to switch between its states using another device? It all comes down to what are the possibilities to interface an Amazon Echo / Dot (and Alexa

  • , or if you can connect to one device at home from your cell phone, all this through the internet, then we are talking about IoT devices (the embedded devices, not the phone). So, having agreed on what I mean... bytes between devices. I just want something simpler than that, something I can do myself. You may say that implementing my own "cloud", if that is something I have to do, is not simple and sometimes... to mention that I'm proficient in C and I use Linux as my everyday OS at work as well as in my home, so please avoid windows stuff because that is useless to me. I'm not afraid of anything I have

  • , or if you can connect to one device at home from your cell phone, all this through the internet, then we are talking about IoT devices (the embedded devices, not the phone). So, having agreed on what I mean... bytes between devices. I just want something simpler than that, something I can do myself. You may say that implementing my own "cloud", if that is something I have to do, is not simple and sometimes... to mention that I'm proficient in C and I use Linux as my everyday OS at work as well as in my home, so please avoid windows stuff because that is useless to me. I'm not afraid of anything I have

  • conversation history to personalize the ads I see? If you interact with the Google Assistant, we treat this similarly to searching on Google and may use these interactions to deliver more useful ads. You can delete past interactions with your Assistant at any time. What exactly is Google using when it says 'conversation history' - is Google Home listening to everything so it can target advertisements or are my queries only stored after saying 'OK Google'? Some sources suggest that the Google Home might even be recording what I listen to on the TV: "That microphone will be a witness

  • conversation history to personalize the ads I see? If you interact with the Google Assistant, we treat this similarly to searching on Google and may use these interactions to deliver more useful ads. You can delete past interactions with your Assistant at any time. What exactly is Google using when it says 'conversation history' - is Google Home listening to everything so it can target advertisements or are my queries only stored after saying 'OK Google'? Some sources suggest that the Google Home might even be recording what I listen to on the TV: "That microphone will be a witness

Data information